With the development of technology, smart home life is becoming more and more popular. Many friends have an additional smart sweeper at home, which can help you reduce the burden of housework. But as a quiet smart home product, how to maintain and maintain it is still very important.
The current sweepers are mainly based on lithium batteries, and some are nickel-metal hydride batteries. Because nickel-metal hydride batteries have a memory effect, special attention should be paid when using them. When the power is exhausted, recharge it, and use it when it is full. Otherwise, It's easy to compromise battery life.
In addition, everyone knows that the battery should not be close to the fire source. Generally, the manual of the sweeping robot on the market has a safe operating temperature range, which is about -10°C to 50°C. High temperature in summer, users try to reduce the use in high temperature environment, because the temperature rises, the electrolyte solution inside the battery will have side reactions and generate a large amount of gas, causing the battery to lose water, increase the internal resistance, and seriously reduce the capacity until it can not be used. In severe cases, it will directly cause the battery to explode, resulting in equipment damage.
Maintenance of small details
1. Keep away from watery areas
Try to avoid using it in places with water stains such as the kitchen or bathroom. Slight water droplets in the living room are fine. The sweeping robots are composed of many electronic components, especially the charging docking electrodes at the bottom. Although some robots are waterproof, long-term contact with water will still affect the service life of the machine. Therefore, try to avoid contact with water and keep it dry for a long time to improve the service life
2. Regularly clean the dust box
The dust box is filled with garbage. Once the garbage is full, it must be disposed of in time to prevent accumulation and breeding of bacteria. When cleaning, clean the filter together, so as to ensure the permeability of the filter and filter out fresher air
3. When not in use, it can be kept on the charging stand to charge
When the robot is not in use, it can be kept on the charging stand. After the machine is fully charged, it will automatically enter the sleep state, and the power will not continue to increase, and the battery life will not be compromised. This ensures that every cleaning time There is sufficient power. This is for lithium batteries without memory effect, which can be used and charged at any time, but for nickel-metal hydride batteries, etc. it is not recommended to use in this way.
